Nzxt H510 Flow Manual (2024)

FAQs

What size GPU can fit in NZXT H510? ›

Every H510 includes high-performance fans with fluid dynamic bearings for quiet performance.

Internal Layout. Peeking inside the case, it's also among the simplest ATX cases, featuring a large upper compartment to fit up to an ATX motherboard, GPUs up to 14.5 inches (360mm) long, and CPU coolers up to 6.5 inches (165 mm) tall.

Generally, you want the case fans in front of the case drawing in air while the fans at the rear blow air out. If your case has vents at the top, they should be placed as exhaust fans because hot air will rise. Side-mounted fans should be used for intake, though they often don't have air filters.

One 120mm NZXT intake fan in front. You can fit two 120mm or 140mm fans in front on intake side. You can fit one 120mm or 140mm fan on top (140mm fan would depend on the CPU cooler type you end up choosing). You can fit one 120mm fan in back on exhaust side.

Is the Vertical GPU Mounting Kit compatible with older NZXT Cases, like the H510 or H710 series? Unfortunately the Vertical GPU Mounting Kit is not compatible with older NZXT cases without requiring potential modification to the case itself. We do not recommend modifying the case to fit the Vertical GPU Mounting kit.

(12.5inches) even with a aio with 4 fans should still be able to fit in the nzxt 510. Still great length for a modest atx case. I have the h510 Elite and the gigabyte 3080 gaming oc in there with the 240mm cooler. Just fits with roughly 20mm clearance.

Yes, a 4090 will fit in the new H5

plugs are on the back.

Overall, it's one the best cases I've ever owned. It looks great, the price isn't bad, it's really easy to work in and isn't ungodly heavy, and cable management is about as easy as you could hope for. Amazing, for all white builds.

Is the NZXT H510 loud? ›

The case doesn't keep a lot of noise in either with the mesh front, but that's to be expected. With mild fans like these, this case will reward you accordingly if you buy a quiet CPU cooler and GPU.

Aside from the new addition to airflow, you get all the iconic features of the H510 such as: User-friendly design. Iconic cable management bar and tinted tempered-glass side panel.

2HDD, 2SSD or 4SSDs though you can just place the SSDs loose in the PSU basem*nt if needed. Also you can buy spare caddy's and clip them into the perforated panel above the PSU.

All H510 series cases can comfortably fit most 120mm, 140mm, 240mm, and 280mm radiators mounted to the front of the case, or a single 120mm radiator mounted to the rear of the case.

H5 has an additional fan aimed at the gpu, and also it allows for 240 aios be installed at the top, so h5 is way better than h510. H5 flow is a super good case, my gpu temp never goes over 55 in 4k, cpu temp hardly pokes above 50 with a 280mm front aio.